Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 169 / 416-
3.4. Configuring Voice Port
3.4.1. Configuring the Gateway Voice Port
Generally, voice port command is to configure the characteristics of a specific voice port
signaling type. In most of telephone network environments, a proper value is fixed with the
default voice port command for FXO and FXS ports to transmit voice data to the existing IP
network.
3.4.2. Voice Port Configuration Items and Order
3.4.2.1. Configuring FXS and FXO Port
In most of telephone network environments, the default value of voice ports are properly
configured to FXO and FXS. If you need to change the default values of these voice ports,
process the following procedure. The first 2 items are mandatory and the third one is optional.
1) Specify a voice port and enter the voice port configuration mode.
2) Set up the necessary parameters of the voice port
3) The followings are the commands to set up the optional voice port parameters:
¾ PLAR(Private Line Auto Ringdown) connection mode
¾ Description
¾ Ring Number
¾ Input Gain
¾ Output Gain
Step Commands Purpose of Usage
1 configure terminal
Enter global configuration mode.
2 voice-port location
Move to the specified voice port configuration mode
Indicate location as slot-number/port-number
3 ring number number
(Use only to FXO port)
Set the maximum number of ringing prior to
responding to a call
4 connection plar string
(Optional Command)
Set up PLAR (Private Line Auto Ringdown)
connection for the port
The string value is Destination Phone Number
5 description string
(Optional Command)