Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 166 / 416-
3.3.11. Configuring and Applying Inbound-pots-peer
When VoIP interface seems well and its communication with gatekeeper is normal, all the calls
are delivered through this network.
However, when communication of VoIP interface with gatekeeper can be placed in abnormal
status due to a network failure or a certain exception and the call can not be delivered properly,
the feature of inbound-pots-peer related to PSTN-Backup, which transfers to PSTN
automatically, is provided by the gateway.
The default setting of the AddPac gateway is to disable inbound-pots-peer, but using the following
commands, you can enable the call :
inbound-pots-peer 0
no inbound-pots-peer
This features is used to minimize the complexity involved with PSTN backup configuration, by
using translation rule, when port to port needs to be mapped 1:1 in some special cases.
Step Steps Commands
1
model name# configure Enter configuration mode
2
model name(config)# dial-peer voice tag
pots
Move to dial-peer configuration mode.
tag is the only identifier of dial peer in this
system and it takes the range of value,
0~65535.
3
model name(config-dialpeer-pots-<tag>)#
inbound-pots-peer <tag>
Apply inbound-pots-peer
tag is the only identifier in this system and
it takes the range of value, 0~65535.