Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 165 / 416-
type.
In the non-confirm type, after User B makes a call to User C, while the phone is ringing, the
call transfer takes a place. The AddPac gateway supports both types.
3.3.10. Configuring and Applying Call Pickup
Call pickup, which is used by an end user as VoIP interoperates with PBX, is the feature
provided from PBX. However, the call pickup in here is the configuration for a telephone
connected to FXS port of the gateway directly.
The default setting of the AddPac gateway is set to disable the call pickup, but using the
following commands, you can enable the call pickup:
dial-peer call-pickup #11
From the example above, call pickup code is #11 and when a call is processed to be ringing,
another telephone connected to another FXS hooks off, then you may press the call pickup code
to pick up the call of the port while it is ringing.
If you want to disable this feature, you can set up no dial-peer call-pickup.
Step Commands Description
1
model name# configure terminal Enter configuration mode
2
model name(config)# dial-peer
call-pickup
<0-9|#|*> + IA5 digits
This is the operation mode call pick-up.