Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 160 / 416-
3.3.7.5. Applying Translation Rule to Connect Call
This feature is to support the translation rule for the relayed digit (DTMF relay) in the state of
which the call has been configured.
When to configure the call, this feature is distinguished from number translation which translates
calling party number or called party number.
The following figure describes the difference between number translation (translation-rule)
and translation-digit. When the called-party number (destination number) applies to the
outgoing side of the gateway 999 to be translated to 4567, by the rule for number translation
(translation-rule), this rule is used to translate the called-party number of e.164 number, which is
also used for the setup.
In other word, this is the translation for a telephone number. If the same rule applies to
translation-digit, it is used for translating the digit to be delivered by DTMF relay. Therefore,
translation-digit has nothing to do with e.164 number which is used for the setup.
Step Steps Commands
1
model name# configure terminal Get into global configuration mode.
2
model name(config)# dial-peer voice tag
voip }
Enter dial-peer configuration mode
tag is the only identifier of dial-peer in this
system and its range of value is 0 ~
65535.
3
Router(dial-peer-config)# tag is to reference the rule set. The range
Analog Phone
1234
Analog Phone
4567
AddPac
VoIP Gateway
AddPac
VoIP Gateway
Digit 9999
Play Dial tone
Setup 4567
Ringging
Hook off
Hook off
connect
Digit 9999
H245 DTMF relay
4567
Play digit
4567
Digit 1234
H245 DTMF relay
1234
Play digit
1234
Translate-digit
9999 to 4567
Number Translation
9999 to 4567