Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 159 / 416-
calling-number} tag
calling-number : Apply translation rule to
the inbound calling party number
tag is to reference the rule set. The range
of value is 0-65535.
If the translations is applied to the called party number and the number information is entered in
the order of the voice port, check whether number translation takes a place, wherever the
information is entered.
3.3.7.3. Applying Translation Rule to Inbound VOIP Call
You may need to configure the following setting in order to apply the translation rule to all the
incoming calls from a network.
Step Commands Purpose of Usage
1
model name# configure terminal Get into global configuration mode
2
model name(config)# voice service voip Enter voice service voip configuration
mode
3
Router(service-voip)#
translate-voip-incoming {called-number |
calling-number} tag
called-number : Apply translation rule to
the inbound called party number
calling-number : Apply translation rule to
the inbound calling party number
tag is to reference the rule set. The range
of value is 0-65535.
3.3.7.4. Applying Translation Rule to Outbound Call
You may need to configure the following settings in order to apply the translation rule to the
outbound call of a specific dial peer (POTS peer or VoIP peer).
Steps Commands Purpose of Usage
1
model name# configure terminal Get into global configuration mode.
2
model name(config)# dial-peer voice tag
{ pots | voip }
tag is the only identifier of dial-peer in
this system and its range of value is
0-6535.
3
Router(dial-peer-config)#
translate-outgoing {called-number |
calling-number} tag
called-number : Apply translation rule to
the outbound called party number
calling-number : Apply translation rule
to the outbound calling party number
tag is to reference the rule set. The
range of value is 0-65535.