Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 154 / 416-
If you want to place restrict a call for the inbound VoIP peer, set the pattern, which you want to
restrict, to the destination pattern and use the commands to configure shutdown and hunt group.
If it is necessary, the dial peer, that you intend to restrict, is selected as a top priority.
From the example above, if the calling party number of the inbound call, starting with 526, or is
5441234, the call is not processed.
If you want block the inbound VoIP call starting with the number 538 and allow the outbound
call, use answer-address as to follow:
dial-peer voice 103 voip
answer-address 538 ....
shutdown
3.3.5. Number Forwarding and Prefix
In the previous section of 3.3.3, forwarding of the number for POTS peer was mentioned.
The forwarding of the number for the outbound POTS peer forwards the digits except the fixed
digit of destination-patter of the outbound POTS peer.
For example, if destination-pattern is 444…, the fixed digit is 444. If the call party number of
the inbound call is 444123456, the digits of 123456 is forwarded to the voice port to the
outbound POTS peer. (In case of analog voice port, DTMF tones of forwarding digits are
generated and in case of digital E1 voice port, forwarding digits are set to the called party
number field to other side)
If this outbound POTS peer is set to prefix 99,, the digit forwarding of 99 is forwarded first,
and then delayed 2 seconds by ‘,,’ , after then forward 123456.
The number forwarding process, which has been explained above, is about the default settings.
For more detailed operation of the number forwarding, configure forward-digit to POTS peer
configuration.
The dial peer configured with forward-digit does not check the fixed digit of destination
pattern and forwards the number depending on the value, which is set by forward-digit. The
settings of forward digit can be operated by forward-digit from and forward-digit last.
forward-digit from forwards all the digits to the number, which has been set, of the called part
number of the inbound call.
forward-digit last forwards the last portion of the numbers as many as it is set from the called
party number of the inbound call.