Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 153 / 416-
preference 0
!
dial-peer voice 102 pots
destination-pattern 472....
prefix 472
port 0
preference 1
In this example above, VoIP peer 101 and POTS peer 102 exist in the same hunt group. Since
the preference value of VoIP peer is lower and this is selected first for the call attempt and when
it fails, another call attempt is to be made to POTS peer 102.
3.3.4.3. Call bar
As it has been explained previously, you can block the outbound and inbound call process with
a specific pattern by using huntstop and shutdown.
If you want to place restrict a call for the outbound peer, set the pattern to destination pattern
and use the commands to configure shutdown and hunt stop.
All the outbound calls, in the below example, are set to choose VoIP peer 100, but the call can
not be processed for the called party number starting with 526 or 5441234.
dial-peer voice 100 voip
destination-pattern T
session-target ras
dial-peer voice 101 voip
destination-pattern 526T
session-target ras
huntstop
shutdown
dial-peer voice 102 voip
destination-pattern 5441234
session-target ras
huntstop
shutdown