Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1

AddPac Technology Co., LTD

- 139 / 416-

include Quality of Service (QoS), Compression/decompression (Codec), Voice Activation

Detection (VAD), FAX Rate and others.

Figure 3.1 Dial Peer Call Leg from a View Point of Source Gateway

Figure 3.2 Dial Peer Call Leg from a View Point of Destination Gateway

In VoIP, the dial peer can be categorized as either VoIP (Voice over IP) dial peer or POTS (Plain

Old Telephone Service) dial peers.

z POTS Dial Peer: This is a type of dial peer includes traditional telephone network devices

such as phone sets, cell phones and fax machines. POTS dial peer means the characters

contributed to the existing telephone network. POTS dial peer indicates a specific voice

port in telephony network devices. When to configure POTS dial peer, port command and

destination-pattern command must be set up first. destination-pattern command is,

related to POTS dial peer configuration to set up a telephone number with connection to

POTS dial peer. Port command is, related to POTS dial peer configuration, to configure a

specific logical dial interface (a voice port of the gateway connected to the local POTS

network)

IP Cloud

Source

Destination

Dial Peer1

Dial Peer3

Dial Peer2 Dial Peer4

Call leg for POTS Dial Peer1 Call leg for VoIP Dial Peer2