Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 13 / 416-
Preface – About This Guide
The APOS 2.0 (APOS G2) voice configuration guide collects in one place
information that you need to implement APOS Release 3.1 voice features. It is
organized in the following chapters:
z Chapter 1. 『Overview』
This chapter describes its features and lists the hardware and software
specifications of the AddPac VoiceFinder gateways.
z Chapter 2. 『Configuring VoiceFinder Gateways for Operation』
This chapter describes how to use commands and all the related setting
modes by presenting configuration examples to configure AddPac VoIP
gateways as in a way to be suitable to the user’s environment and interface.
This chapter is very important and highly recommended to be studied
thoroughly.
z Chapter 3. 『Voice Port Configuration』
This chapter describes the type of connection being made and the type of
signaling to take place over this connection. In addition to the commands
for basic configuration, there are also fine-tuning for voice quality, enable
special features. This chapter is very important and highly recommended to
be studied thoroughly.
z Appendix A 『Reason Code Value for H. 323 Call Termination』
This appendix explains the reason code value for H.323 termination of
VoiceFinder Gateways and mapping Q.931 and H.225 call signaling and
communication between endpoints (call signaling) and the gatekeeper.
z Appendix B 『Reference Documents』
This appendix is organized with all the related RFC/OUT-T documents for
SIP/H.323/MGCP of VoIP protocol and TCP/IP protocol
z Appendix C 『Cable Specifications』
This appendix explains of console cable, V.35 cable and Ethernet cable
specifications to be used for the gateways
z Appendix D 『Acronyms and Glossary』
The acronyms and glossary of VoIP are organized in alphabetical order