Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 118 / 416-
z clock [current/running/start]
This is the command to display the system clock of the present gateway.
z ip dhcp [option]
1. Displays the configured setting of DHCP
2. Please ref to ‘Configuring DHCP’ in the previous section for more details.
z Ip icmp statistics
Display System Clock of the present gateway
z Interface [Dialer/FastEthernet/Loopback/Tunnel]
[<main-interface>.<sub-interface>]
Describe the status and settings of interface.
z logging [option]
Display the content of Logging Buffer
z ip nat [option]
1. Display NAT settings
2. Please refer to ‘Configuring NAT’ in the previous section for more details.
z ip route {connected/static/ospf/rip}
1. Display the route information table which has been determined.
2. Displays each table formed by each algorithm by using the options of OSPF/RIP/Static.
3. Refer to ‘Configuring Routing’ in the previous section for more details.
z running-config
Displays currently running configurations.
z startup-config
Displays the saved Configuration File.
z snmp
Displays the configured setting for SNMP protocol status and options.