Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 116 / 416-
2.15. Fault Management and Debugging
This section describes how to mange and process the fault when it takes a place in Voice Finder
Gateway. The gateway provides Show, Debug and logging commands for its fault management.
2.15.1. Logging Commands
Logging command provides logging the operational status to manage the equipment,
determines the level and end out the information to a specific host outside.
The followings are the related commands for Logging configuration.
z logging on
Enable logging for all the possible destinations.
z logging command
This the command used for logging the user commands which can be entered.
z logging event {option}
1. This is the command to set the conditions for logging.
2. Option
1) 0-emergency : Logging the level less than Emergency
2) 1-alart : Logging the level less than alert
3) 2-critical : Logging the level less than critical
4) 3-error : Logging the level less than error
5) 4-warning : Logging the level less than warning
6) 5-notification: Logging the level less than Notification
7) 6-infonational : Logging the level less than Informational
8) 7-debug : Logging the level less than debug
z logging host server ip/ ipv6 <ip-address> <port>
1. This is the command to set the condition for the host to where the logging information is
to be sent to.