Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1

AddPac Technology Co., LTD

- 111 / 416-

is no entry, set the timeout to 0. The first entry is for minute and the second one is for second.

Router(config-line)# exec-timeout 0 0

z access-class WORD , ipv6 access-class WORD

Define the host which can access to VTY server. If access-class is not configured and any

host can access, only the host matching with access-list can access.

z Session-limit <1-8>

Limit the maximum number of VTY which is possible to access. If the number to be

configured exceeds the maximum limit, the basic setting value is the maximum. The

number does not include the number of console connections.

z logging { option }

1. Set up logging

2. Refer to ‘Fault Management and Debugging for more details.

z ip nat { option }

1. Configure NAT(Network Address Translation)

2. Refer to ‘Configuring NAT’ in the previous section for more details.

z no {option}

Negate the used or configured commands.

z ip route {option}

1. Configure static route.

Refer to ‘Routing Configuration’ in the previous section for more details.

z snmp { option }

1. Configure SNMP protocol for management

2. Refer to ‘Configuring SNMP’ ion the previous section for more details.

z username { Option }

1. Administer the gateway user

2. Refer to ‘User, Password, Software Image and Configured File Management’ for more

details.