Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 109 / 416-
z ems-server timeout <1-60>
1. Set the server timeout for EMS server configuration.
2. If this is not specified, it is basically set to 3 seconds.
z ems-server status-interval <10-86400>
1. Set a frequency of reporting the status for EMS server configuration.
2. Report the present status for the equipment to EMS server periodically.
3. Without the setup, it is basically set to 5 seconds.
z ems-server provisioning-required
1. This commend is to set up the server to request for provisioning for EMS server
configuration.
2. This setting is to be configured first in the beginning for the equipment configuration
by using EMS.
3. The configuration become disable automatically in EMS, when the configured settings
of the equipment is executed normally.
z ethernet [full-duplex|half-duplex]
1. This command is to set up Ethernet interface to full-duplex.
2. The default is half-duplex.
z exit
1. Exit the present mode and move to another one case lower
2. Return to exec mode by using exit command from global configuration mode
z help
This command describes Interactive Help System.
z http server
Enable HTTP server.
z http port <1-65535>
Change HTTP server port. When it is not specified, the number 80 is used.