Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 108 / 416-
4. Please refer to ‘ip dhcp’ section for the related configuration.
5. Please refer to ‘Configuring DHCP’ in previous section
z dns domain-lookup
Enable DNS lookup. The default value is enabled for including DNS.
z dns name-server { A.B.C.D | X:X::X:X }
1. Specify DNS name-server. Possible in IPv4/ IPv6 format. First-in order determines the
priority order.
2. 5 units can be entered at maximum. Even more that 5 units are entered, only 5 units can
be applied. However, the order applies 5 units regardless of IPv4 / IPv6.
z dns domain-name
Enter a domain name located in the equipment. It can be operated even without entering
the option.
z dns host WORD { A.B.C.D | X:X::X:X }
1. Maintain the table without DNS Query.
2. When the name (WORD) to the table with the same host performs DNS Query, the table
address replaces DNS Query.
3. When the 2 addresses have the same name, only one of them can be registered.
z ems-server host { A.B.C.D|ALIAS }
Configure the server address for EMS server configuration. The server can support only
one server in IP address and DNS server formats, all both of them are possible.
z ems-server key WORD
1. Enter an encryption key for the server authentication of EMS server configuration. If
the encryption key is different, the server does not authorize.
2. The encryption key is a string and ‘?’ is not allowed between the spaces.
z ems-server retransmit <0-100>
1. Set a counter for a number of retransmission for EMS server configuration.
2. Specify the counter for the maximum number of retransmission when the server
transmits a message and no response is received during the timeout.
3. When this is not specified, it basically repeats the process 3 times.