Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 105 / 416-
probes] [-s src] [-w waittime] target [datalen]
Find any path to access to the remote host in IPv6 environment.
z who
Display the information of the user who is being connected to the system presently. The
user id is in vty [id] format.
z
whoami
Display the information of the user who are being connected to and using the system
presently.
2.14.2. Global Configuration Mode Commands
[Command Format and Options]
z access-list { option }
1. Set up an access-list for the packets
2. For more details of the content, please refer to the previous section of Access-List
z application
1. Configure the user application
2. The current version supports the mapping between H.323 Q850 Cause values
z arp {option}
1. This command is to register ARP Entry statically or dynamically.
2. Option
1) static <ip-address-number> <mac-address-number> : Register Mac Address to
ARP table statically for the IP host.
2) keep <keep-timer-value> : The timer value that the gateway support is the value
between 120-3600(sec).
z arp A.B.C.D H.H.H
1. Register a static ARP entry
2. Enter MAC address by 2 bytes out of 6 bytes in total