Installation guide

VoiceFinder AP100 VoIP Gateway Installation Guide (Edition 1.0)
AddPac Technology Proprietary & Documentation 40 - 5
Introduction
This Introduction describes the organization of this document and the symbols and legend used in the
document.
[ Document Organization ]
The purpose of this document is to help you install AP100 Gateway easily. This document consists of
four chapters.
If you have been used AP100 VoIP gateway before, refer to helpful chapters. If you are not familiar
with AP100, or have not installed it before, you read this document carefully before handling AP100.
z Chapter 1 『 VoiceFinder AP100 Overview 』 provides an overview of the features of AP100,
and describes its hardware and software specification.
z Chapter 2 『 Preparatory Information on AP100 Installation 』 describes the environment
required for AP100 installation as well as safety recommendations and preparatory information
on AP100 installation.
z Chapter 3 『 AP100 Installation 』 describes basic information on installation such as the
methods of connecting cables to AP100 and of using the console terminals.
z Chapter 4 『 Appendix 』 describes the specification of AP100 and required cables used for
each interface.