Installation guide

VoiceFinder AP100 VoIP Gateway Installation Guide (Edition 1.0)
AddPac Technology Proprietary & Documentation 40 - 34
z Once the login message is displayed, enter the login default, “root
” and the password default,
“router
”. Then, the login will be complete. Once the login is complete, a prompt, “AP100>” will
be displayed on the console terminal.
[Figure 3-8] Example of Telnet Connection
z The prompts displayed at AP100 Gateway are “AP100>” and “AP100#”. If “>” is displayed at the
prompt, it would mean that the login user has permissions other than “admin”, cannot use a
command that allows you to change the gateway settings, and has the minimum permission. If “#”
is displayed at the prompt, it would mean that the login user has the “admin” privilege, and can
use all of the gateway features, if required.
z If you login as Admin, you can change any and all of the gateway settings. It is recommended that
you should change the default value of the admin account password for security. For detailed
information on how to change the password and to set up AP100, refer to the Quick Operation
Guide and APOS Operation Guide.