Installation guide

VoiceFinder AP100 VoIP Gateway Installation Guide (Edition 1.0)
AddPac Technology Proprietary & Documentation 40 - 27
3.3. Power Supply and Verification of Proper Operation
Before supplying the power, you should be aware of the following procedure for booting AP100:
z AP100 performs a self-test, and checks if the CPU, memory, and interfaces are properly operating.
z The boot loader operates, and finds an appropriate software image file. In the default
configuration, the product loads the software in the flash memory.
z If the boot loader cannot find an appropriate software image file from the flash memory, it will wait
in boot mode until it can download appropriate gateway software from an appropriate remote
system. (In such a case, the boot loader can download the software by using TFTP or FTP.)
z Once the gateway software is loaded, AP100 will operate in accordance with its settings. If there
are not any settings saved, the system will operate at the initial value and the manager must set
related options for proper network operation.