Installation guide

VoiceFinder AP100 VoIP Gateway Installation Guide (Edition 1.0)
AddPac Technology Proprietary & Documentation 40 - 24
3.2. Sequence of Connecting Cables to AP100 Interfaces
z Install AP100 in an environment that conforms to the recommendations of Chapter 2.
3.2.1. Connecting Ethernet Interfaces
z Connect the LAN0 interface to the LAN interface of the WAN device by using an RJ45 UTP cable.
Connect the LAN1 interface to the internal LAN of the PC.
[Figure 3-1] Standard Network Configuration Using VoiceFinder AP100 Gateway