Installation guide

VoiceFinder AP100 VoIP Gateway Installation Guide (Edition 1.0)
AddPac Technology Proprietary & Documentation 40 - 18
1.3.2. Fixed Network Interface
AP100 VoIP Gateway supports fixed network interfaces of high quality as follows:
z 1-Port 10/100Mbps Ethernet Interface for WAN
z 1-Port 10/100Mbps Ethernet Interface for LAN
The specification of the above network interfaces allows you to configure WAN and LAN that support
network protocols based on TCP/IP and to configure networks for dedicated lines or VoIP networks on
a broadband network through ADSL or cable modems. The LAN interface for WAN connections can
be connected to a cable modem or ADSL; thus, you can easily configure a VoIP network environment
at home or SOHOs.
The network interfaces supported by AP100 VoIP Gateway by default are described below:
1-Port 10/100 Mbps Ethernet WAN Interface (RJ45)
(1-Port 10/100 Mbps Ethernet Interface for WAN: RJ45)
AP100 VoIP gateway supports one 10/100Mbps Fast Ethernet interface, which allows you to
configure WAN. The interface is defined as an RJ45-type standard interface.
1-Port 10/100 Mbps Ethernet LAN Interface (RJ45)
(1-Port 10/100 Mbps Ethernet Interface for LAN: RJ45)
AP100 VoIP gateway supports one 10/100Mbps Fast Ethernet interface, which allows you to
configure LAN. The interface is defined as an RJ45-type standard interface.