Installation guide

VoiceFinder AP100 VoIP Gateway Installation Guide (Edition 1.0)
AddPac Technology Proprietary & Documentation 40 - 17
Rear View of AP100
The rear panel of AP100 VoIP gateway has the 10/100Mbps Fast Ethernet interface port for
WAN/LAN, and phone interfaces for voice processing, and allows you to configure a network for
WAN-to-LAN routing services.
Standard Configuration Model
The figure below shows the exterior of the rear panel:
[Figure 1-4] Rear Panel of VoiceFinder AP100 VoIP Gateway
The rear panel of the standard setup model of AP100 VoIP Gateway is described in the table below.
(The configuration may vary depending on models.)
No. LED Description
①
PHONE
FXS voice interface I/O port that allows you to connect a regular
phone or a facsimile (RJ11)
②
SW
Switches that supply or block the power to the system
③
DC Input
Connects to the external adapter of 5V 2A to supply power.
④
LAN0
10/100 Mbps Ethernet interface for WAN connections (RJ45)
⑤
LAN1
10/100 Mbps Ethernet interface for LAN connections such as Direct
PC connection (RJ45)
[Table 1-2] Rear Panel of VoiceFinder AP100 VoIP Gateway