Installation guide

VoiceFinder AP1000 VoIP Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 42/
37
Voice Module Ready
DSP S/W download (0): .... OK
The System is ready. Please login to system.
Gatekeeper shutdowned.
login:
VoIP in service.
Figure 3-9: The HyperTerminal message of VoiceFinder AP1000 Gateway
z With the log-in message, input the user name “root” and the password “router”.
After the log-in process, the prompt “router#” is displayed on the console terminal.
z There are two types of prompts used for VoiceFinder AP1000 Gateway: “router>”
and “router#”. The “ > ” prompt indicates that the user is not an administrator. With
this prompt, the user is unable to use certain commands: particularly the
configuration commands. The “ # ” prompt indicates that the user is an administrator
(or root), and the user is authorized to use all the functions and commands.
z Log-in as “Admin” allows changing settings. Therefore, it is advised to change the
default password for security purposes. Refer to Quick Operation Guide & APOS
Operation Guide for password change and detailed configuration.