User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
61 -
[Example] Added Commands during PAP Configuration (Client)
This is when AP160 dial-up VoIP gateway is used as a PPP CallIn on the client
side.
AP160(config)# interface async 0
☞ Enters into the interface configuration mode.
AP160(config-async0)# encapsulation ppp
☞ Sets the PPP mode.
AP160(config-async0)# ppp authentication pap
☞ Sets the PPP authentication mode as PAP for the async 0
interface.
AP160(config-async0)# ppp pap sent-username ADDPAC password
12345678
☞ Sends the user name and the password that were saved in
the server during PPP connection.
AP160(config-async0)# ppp timeout 100
☞ Sets PPP connection negotiation timeout value as 100
seconds.
AP160(config-async0)# end
☞ Exists from the configuration menu.
AP160 # debug ppp packet
☞ Stops PPP packet debugging.
AP160 #
AS0: CONNECT 26400
async0 LCP: TIMEOUT
async0 LCP: O CONFREQ id=1
ASYNCMAP 0xa0000 MagicNumber 0x7b7b PCOMP
ACCOMP
Interface async0, changed state to CONNECT
AS0: Welcome to 3Com Total Control HiPer ARC (TM)
AS0: Networks That Go The Distance (TM)
AP160# async0 LCP: TIMEOUT
async0 LCP: O CONFREQ id=1