User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
57 -
z ip address <ip_address> <net_mask>
Sets the IP address for the selected interface.
In case the dynamic IP address is assigned via PPP protocol, IP address is
assigned automatically via IPCP protocl
z user add <username> <password> {admin/high/normal/low}
1. Sets the login name and the password to authenticate a router that is
trying to access to another router that functions as a PPP PAP/CHAP
server.
2. This command functions same as the command that the router
manager uses to register a login user. This is because the router shares
the PPP registered user database and the router user database. The
operator registers users as using the same command.
3. The difference from the registration of router users is that “user add”
command does not use the registered user level for PPP connection in
the user registration..
z ppp authentication {chap/pap} [callin/{pap/chap}]
i. Sets the PPP authentication method as CAHP or PAP in the interface
configuration mode.
ii. The “callin” option is to connect only incoming calls by CHAP
authentication. .
iii. {pap/chap} option is to respond to the calls which request both of
CHAP and PAP authentications.
z ppp chap hostname name
i. This command is for PPP client devices. This command registers a user
name to request connection to the PPP server device when using PPP
CHAP authentication. (An optional command for CHAP
authentication)
ii. If this command is not used, the router name (displayed in the router
prompt) will be considered as the user name.