User`s guide
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
51 -
file
shell Using this command, a operator can enter the modem AT
command line mode directly
speed This command is used for UART transmission speed setting
between CPU and dial-up modem.
4.2.3.2.2.1. do-script commands
These commands are modem script running commands. Therefore, these
commands are used when a specific modem script execution is needed.
Related command
Ap160 (config-async0)# modem script <dialer|hangup|reset|startup>
Commands Description
dialer Modem script for dialing
hangup Modem script for the termination of connection mode
reset Modem script for reset
startup Modem script for initialization
stop-dial Modem script for stop-dialing
4.2.3.2.2.2. script commands
This commands are used for registration of modem script file
Commands Description
dialer
AT command for the modem connection (example :
ATDT9W1231234)
Default : none
hangup
AT command for the termination of modem connection
mode
Default : "+++ATH"
reset
AT command for the modem reset
Default : "ATZ"
startup AT command for the modem initialization