User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
42 -
4.2. Command Usage
The operator can use all commands of the VoiceFinder AP160 dial-up VoIP
gateway through the consol or telnet terminal (VT100 terminal.)
There are three kinds of commands – commands of the user mode, commands
of the manager mode and commands of the configuration mode.
Commands of the user mode enable the operator to check limited information
of the system and provide a connection function for data communication.
Commands of the manager mode enable the operator to check configuration
status of the Gateway and perform debugging. And commands of the
configuration mode enable the operator to change configuration
environment and set new environment.
The VoiceFinder AP160 dial-up VoIP gateway has following features regarding
operator’s entering commands.
z Although the operator enters only a part of the command, the VoiceFinder
AP160 dial-up VoIP gateway automatically recognizes the whole
command. For example, if the operator enters only “sh” or “sho” instead
of “show” the VoiceFinder AP160 dial-up VoIP gateway automatically
recognizes “sh” or “sho” as “show.”
z The VoiceFinder AP160 dial-up VoIP gateway provides an online help
function so the user can check corresponding items for the command and
command syntax.
z The VoiceFinder AP160 dial-up VoIP gateway provides "More" function that
divides a long message into several messages so that the operator can see
the whole message by scrolling the screen.
z The VoiceFinder AP160 dial-up VoIP gateway provides Help and “?”