User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
20 -
1.4.2. Network Interface
The Standard Model of AP160 dial-up VoIP gateway supports network
interfaces such as following lists.
z 1 port PSTN modem interface including PSTN backup interface
z 1 Port 10Mbps Ethernet Interface
z 1 Port RS232C Asynchronous Serial Interface.
Above listed network interface can be used in the various WAN/LAN network
environment for VoIP network integration. VoiceFinder AP160 dial-up VoIP
gateway provides the VoIP service over PPP(Point-to-Point Protocol) via
conventional PSTN line using internal PSTN modem chip of AP160.
Also, using the Ethernet port , AP160 dial-up VoIP gateway supports the
standard VoIP service via LAN. The Leased Line, xDSL, and Cable networks are
one of networks supported by AP160 dial-up VoIP gateway.
The next explains the network interfaces of AP160 dial-up VoIP residential
gateway.
1-Port async dial-up modem Interface (RJ11)
VoiceFinder AP160 dial-up VoIP gateway provides one(1) port PSTN modem
interface. Using this PSTN modem interface, AP160 supports the VoIP service via
PSTN line. The PPP protocol is used as a WAN inter-connection protocol via PSTN
modem.
1-Port 10Mbps Ethernet LAN Interface (RJ45)
AP160 dial-up VoIP residential gateway supports the one(1) 10Mbps Ethernet
Interfaces. Using this LAN Interface, various network application services are
possible.
This interface is implemented using standard RJ-45 connector interface.