User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
16 -
1.4. Hardware Configuration and Network Interface
This Chapter explains the external form and network interface module parts of
VoiceFinder AP200 VoIP Residential Gateway.
1.4.1. VoiceFinder AP160 Main Body
The external form of A160 dial-up VoIP gateway is made by high degree of
strength ABS material. The front panel of this equipment is designed to display
the LED that indicates the system operation status. The back panel of AP200
VoIP gateway is designed to support the FXS voice interface port, PSTN modem
interface, PSTN interface and LAN interfaces including RS-232C serial port.
Front View of AP160
To check the system operation status easily, AP160 VoIP dial-up gateway
provides the front panel LED. Following Figure 1-3 and 1-4 shows the external
form of front panel and represents the explanation of each parts.
[Figure 1-3 Front Panel Picture of VoiceFinder AP160 dial-up VoIP gateway ]
Information