VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 VoiceFinder AP160 VoIP Gateway (Residential Gateway) User’s Guide AddPac Technology, Co. Ltd. 2nd fl., Jeong-Am Building., 769-12 Yoksam-dong Kangnam-ku Seoul, Korea 135-080 Phone (82 2)568-3848 Fax (82 2)568-3847 E-mail : info@addpac.com http://www.addpac.com AddPac Technology Co.,Ltd.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 [Contents] Getting into the VoiceFinder AP160 User’s Manual http://www.addpac.com ............................................................................................1 Chapter 1. VoiceFinder AP160 Overview.............................................................8 1.1. Introduction to the AP160 dial-up VoIP Gateway..........................................................8 1.2. Main Features...........................
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Chapter 4. Gateway Configuration and Commands .......................................39 4.1. Gateway Booting............................................................................................................39 4.2. Command Usage ...........................................................................................................42 4.2.1. Commands of the User Mode...................................................
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Getting into the VoiceFinder AP160 User’s Manual Information This chapter provides the overview of the VoiceFinder AP160 gateway user’s manual and an explanation of the symbols and legends involved. In this manual, we only explain the AP160 specific configuration and commands. Please refer the AP200 user’s guide about the other part or common part of VoiceFinder series. .
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 detail technical specifications for the VoiceFinder AP160 dial-up VoIP gateway. For technical support, please contact AddPac Technology Co. Ltd. AddPac Technology Co., Ltd 2nd Fl. Jeong-Am Bulding, 769-12 Yeoksam-Dong, Kangnam-Ku, Seoul, Korea Phone (02) 568-3848 Fax (02) 568-3847 E-mail : info@addpac.com http://www.addpac.com AddPac Technology Co.,Ltd.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 VoiceFinder AP160 dial-up VoIP gateway user’s manual’s revision history are as follows. . Revision No. Date Contents Version 1.0 Mar. 15. 2003 Initial Released AddPac Technology Co.,Ltd.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 [ Symbols and Legends ] The symbols and legends used in this User’s Manual are as follows : z Commands and Keywords are typed in Bold. z Variables that require user inputs are typed in Italic. z Square brackets([]) are Optional values. z Keywords that are required but need selection are grouped in braces({}) and are separated by Slashes( / ). z Angle brackets(<>) are required but appropriate parameters must be inputted.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Chapter 1. VoiceFinder AP160 Overview 1.1. Introduction to the AP160 dial-up VoIP Gateway Information VoiceFinder AP160 dial-up VoIP gateway is a high-performance VoIP gateway using PPP protocol over PSTN dial-up modem. This network equipment, with an internal dial-up modem, supports cost-efficient data and voice service in junction with PSTN networks.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 features. This features help to install the AP200 RGW easily. Following Figure 1-2 shows the external form on the table of AP160 dial-up VoIP Residential Gateway. [Figure 1-2 VoiceFinder AP160 dial-up VoIP residential gateway’s external form] As supplementary service features of AP160 dial-up gateway, this equipment supports the Packet Filtering and Firewall function using Access List method.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 1.2. Main Features Information VoiceFinder AP200 VoIP Residential Gateway provides high-performance voice over IP(VoIP) solution including IP-routing services for small enterprise, government and other public offices as well as internet game room and cyber apartment.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Voice over IP Service z Supports Voice and Data integration services z Supports the maximum 2 FXS voice port z ITU-T H.323 v2 VoIP Protocol with ITU-T H.235 Security Features z Supports the G.723.1, G.729.A, G.711 Voice Compression Algorithms using High Performance DSP z Supports Following Voice Processing Feature 9 VAD(Voice Activity Detection) 9 T.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 z LLO (Line Lock Out) Function z Support Announcement Function for incorrect dialing, busy, network failure, Non-exist Phone number. z Configuration Management and System Management z Operation Data Automatic Backup and restore Function z Port Diagnostic and Testing Function z Support Secondary Gatekeeper in case of First Gatekeeper Failure z H.225, RAS, H.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 z Remote Management using Console, Rlogin, Telnet. z Traffic Queuing z Web based Managements using HTTP sever. Security Functions VoiceFinder AP200 VoIP Residential Gateway supports various security function. z Standard & Extended IP Access List for network security function.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 1.3. APOS Internetworking Software Information This part explains about Software Architecture of APOS(AddPac VoiceFinder Operating System). APOS Internetworking Software for AP PassFinder Router, VoiceFinder Gateway APOS Operating System is a best VoIP Gateway and Router software to provide scalability, reliability, stability, and QoS for IP(Internet Protocol) based Inter-networking solutions.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Optimized Performance and Functionality APOS Operating Software supports the excellent packet processing performance, various QoS Schemes, and overload control capability.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 1.4. Hardware Configuration and Network Interface Information This Chapter explains the external form and network interface module parts of VoiceFinder AP200 VoIP Residential Gateway. 1.4.1. VoiceFinder AP160 Main Body The external form of A160 dial-up VoIP gateway is made by high degree of strength ABS material. The front panel of this equipment is designed to display the LED that indicates the system operation status.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 [Figure 1-4 The front panel diagram of VoiceFinder AP160 dial-up VoIP gateway] Table 1-1 shows the functional explanation about each LED of VoiceFinder AP160 dial-up VoIP gateway. No.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Following figure shows the standard configuration of the back side panel of AP160 dial-up VoIP gateway. [Figure 1-5 Back side panel diagram of VoiceFinder AP160 dial-up VoIP gateway] Following Table 1-2 explains the back side panel interface of AP160 dial-up VoIP gateway. No.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Following Figure 1-6 shows the back panel interface picture of AP160 dial-up VoIP gateway. [Figure 1-6 Back side panel picture of VoiceFinder AP160 dial-up VoIP gateway] AddPac Technology Co.,Ltd.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 1.4.2. Network Interface The Standard Model of AP160 dial-up VoIP gateway supports network interfaces such as following lists. z 1 port PSTN modem interface including PSTN backup interface z 1 Port 10Mbps Ethernet Interface z 1 Port RS232C Asynchronous Serial Interface. Above listed network interface can be used in the various WAN/LAN network environment for VoIP network integration.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 1-Ports Async Serial Interface for Console Port (RJ45) AP160 dial-up VoIP residential gateway provides the network management features using RS-232C asynchronous serial interface port. This interface is implemented using standard RJ-45 connector interface. 1.4.3.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Chapter 2. Before Installation 2.1. Unpacking Before unpacking, check for external damage of the packaging box . If an external damage of the packaging has been found, please contact AddPac Technology Co. Ltd. sales department (sales@addpac.com, tel : +82-2-568-3848) for an immediate exchange of product. If no external damage has found, confirm if the following items are enclosed. No.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 5 AP160 User Guide (This part will be omitted) 1 [Table 2-1. VoiceFinder AP160 Package] If any item is missing, immediately contact AddPac Technology Co. Ltd. customer support AddPac Technology Co.,Ltd.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 2.2. Warning STOP Installation Requirements The following is the recommendation for safe operation of the equipment. z Ensure the AP2160 dial-up VoIP gateway is in a dust-free environment before and after installation. z Ensure the AP160 dial-up VoIP gateway cover is opened on a flat and safe surface. z To prevent accidents, avoid ties, scarf, sleeves, and any other loose clothing from entangling with the Chassis. z 2.2.1.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 z Prevention of Static Electricity 9 The main chip-set of the Gateway are very delicate and misuse may result in static electrical damage. 9 If a static prevention waist strap is available, strap it around the wrist and earth the cord before operating the equipment. 9 If no waist tap is available, earthing by holding a metal part of the Chassis will help prevent static electricity. 2.2.2.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 2.2.3. Prerequisites for Network Connection Observe EIA standards and limitations when installing the Gateway Warning The following section describes the Ethernet Cable, and the Console Cable VoiceFinder AP160 supports. STOP 2.2.3.1. Async (PSTN) Port VoiceFinder AP160 VoIP Gateway는 한 개의 RJ11형의 PSTN 포트를 장비의 후면부에 가지고 있습니다. 전면부에는 이 포트의 상태를 표시하는 LED가 있습니다. 이 포트를 이용하여 전화망에 접속할 때는 규정된 케이블과 커넥터를 사용하시기 바랍니다. 2.2.3.2.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 C의 Cable 사양을 참조하십시오. AddPac Technology Co.,Ltd.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Chapter 3. Gateway Installation and Operation This chapter provides information about the basic installation procedure of VoiceFinder AP160 and related commands. [Prerequisites] Unless a separate order is made, the tools and certain cables are not provided in the package. Prepare the following equipments and tools before installation.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 3.1. Installation 3.1.1. Installation Procedure z Plug in the console cable and configure the console terminal. (Refer to 3.1.2 for details.) z Connect the network to the desired port. Use RJ-45 cable with the LAN 1 port for connection with ADSL/Cable Modem or Router, and the RJ-45 cable with the LAN 0 port for connection with the HUB/Switch. z Log in the Gateway after the booting message on the console with the root account.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Gateways or PCs connected to the Gateway. z Check the routing table to confirm if the Gateway is receiving the network information correctly. z Use the Ping command to check other gateways or PCs connection. z This completes the basic configuration procedure. For optional functions, refer to the related chapter 3.1.2.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 1 0 ACT 3 2 0 PHONE 1 2 AP-FXO4 3 SW RJ-45 Consloe Port Connector DB-9 Serial Port Connector PC [Fig 3.1 RS-232C Console Cable Connection] Port Configuration Settings Modem to Connect Direct connection(Null Modem) to Com port Bit per Second 9,600 Data Bit 8 Parity None Stop Bit 1 Flow Control None [Fig 3.2 Hyper Terminal Configuration] AddPac Technology Co.,Ltd.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 3.1.3. Plug-In Power z Warning STOP The VoiceFinder AP200 Gateway is capable of recognizing and using both 110V and 220V. z The package provides a 220V power cable. If the power supply is 110V, please use a 110V adapter. z Switching the power switch on will turn the Power LED on the front side of the Gateway green.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 not an administrator. At this prompt, the user is unable to use certain commands : particularly the configuration commands. The “ # ” prompt indicates that the user is an administrator(or root), and is authorized to use all the functions and commands. 9 Log-in as “Admin” allows Gateway setting configuration. Therefore, it is advised to change the Gateway password for security purposes.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 DSP S/W download (0): .. OK The System is ready. Please login to system. login: Interface async0, changed state to UP Interface ethernet0.0, changed state to UP VoipGateway::Init1 - No IP address on the VoIP Interface login: [Fig. 3.3 3.2. VoiceFinder AP160 Initial Screen] Environment Configuration Information The Gateway requires various configurations of parameters according to the application.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 In order to log in at an unconfigured gateway, the user must use a set username and password. The user access authority for VoiceFinder AP160 is divided into 4 levels: admin, high, normal, low. All users, other then Admin is prompted “1router>” at log-in. The user must log-in at admin level for Gateway configuration. Factory settings for admin level log-in uses “root” for username and “router” for password.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 This configuration mode allows gateway software upgrade, and commands related to system administration such as configuration saving and backup. It also provides commands for checking the system status. These include commands for displaying CPU resource availability, debugging commands to show packets received and dispatched by the gateway, and show commands to show the configuration status 3.2.2.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 3.2.3. Routing Configuration Environment The VoiceFinder AP160 dial-up VoIP gateway supports static, default routing protocols. The routing protocol is responsible for assignment of packet route, and VoiceFinder AP160 supports multi-protocols simultaneously. Therefore it is required to configure which protocol to use. Refer to “Routing Configuration Environment” and “Interface Configuration Environment”. 3.2.4.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 3.2.6. Voice Integration Configuration Environment The VoiceFinder AP160 dial-up VoIP gateway allows integration of voice applications and data. The VoiceFinder AP160 dial-up VoIP gateway provides a status check of voice and fax support / connection, voice gateway configuration, quality of voice control, PABX connection configuration, and other configuration / status report of voice related.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Chapter 4. Gateway Configuration and Commands Information This chapter describers how to configure the VoiceFinder AP160 dial-up VoIP gateway and commands of the VoiceFinder AP160 dial-up VoIP gateway. In this part, we only explain the AP160 specific configuration and commands. Please refer the AP200 user’s guide about the other part or common part of VoiceFinder series. 4.1.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Caution When booting the system, set Gateway environment and save configuration information as using “copy running-config” command. If the system is normally booted, the following message will appear. System Bootstrap, Version 1.2 Decompressing the image: #############[OK] System Boot Loader, Version 2.0.2/HDT Copyright (c) by AddPac Technology Co., Ltd. Since 1999. System Bootstrap, Version 1.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Copyright (c) by AddPac Technology Co., Ltd. Since 1999. Voice Module type (0): FXS DSP S/W download (0): .. OK The System is ready. Please login to system. login: Interface async0, changed state to UP Interface ethernet0.0, changed state to UP VoipGateway::Init1 - No IP address on the VoIP Interface login: AddPac Technology Co.,Ltd.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 4.2. Command Usage The operator can use all commands of the VoiceFinder AP160 dial-up VoIP gateway through the consol or telnet terminal (VT100 terminal.) There are three kinds of commands – commands of the user mode, commands of the manager mode and commands of the configuration mode. Commands of the user mode enable the operator to check limited information of the system and provide a connection function for data communication.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 functions to display available commands for the corresponding mode and descriptions of commands. z The VoiceFinder AP160 dial-up VoIP gateway provides “History” function. With the history function, the operator does not need to enter the command that the operator had used before. Instead, the operator only needs to use the numbers on the Gateway prompt.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 4.2.1. Commands of the User Mode Every person who logged in the gateway can use commands of the user mode. The prompts is indicated as “1router >” in the user mode.. Command ? Description Displays commands currently available and description of these commands. clock Indicates system time. exit Logs out the operator from the gateway. help Explains command-using method in an interactive way.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 4.2.2. Commands of the Manager Mode The device manager who logged in the gateway can use commands of the manager mode. To use commands of the manager mode, the user shall log in the gateway with the root account or manager’s ID. Only the manager can return to the configuration mode of the gateway. In the manager mode, commands usually show more information than in the user mode according to the options.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 no ping reboot rlogin save Cancels commands entered in the command line or returns commands into default values. Sends an echo message to another network device and tests if the echo message reaches the destination. Reboots the system. Establishes rlogin connection that is similar to the Telnet with by original login. VoIP Command. Make VoIP Configuration Script File uses Gateway VoIP Running Configuration.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 4.2.3. Commands of the Configuration Mode Only the user who has the root account or equivalent authorities can access to the configuration mode. In the manager mode, the user cannot change the existing configuration of the Gateway nor make a new configuration of the Gateway.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 dhcp-list Enables the Gateway to function as a DHCP server or send a DHCP packet broadcasting to other Gateways. dial-peer Sets dial-peer with “VoIP” command. exit Goes to the previous mode. gateway hostname Interface Makes voice gateway related configuration with “VoIP” command. Changes the Gateway name of the network. Enters into the interface configuration mode or creates a logical interface. ip Enables IP routing.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 4.2.3.2. Commands of the Configuration Mode Async Interface(PSTN Modem) In the Async interface configuration mode, the user needs to define a certain interface before Async modem starting configuration. AP160 supports one(1) PSTN modem Async modem interface. Entering the async modem parameter setting mode: Ap160 (config)# interface async 0 Commands 4.2.3.2.1.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 file shell Using this command, a operator can enter the modem AT command line mode directly speed This command is used for UART transmission speed setting between CPU and dial-up modem. 4.2.3.2.2.1. do-script commands These commands are modem script running commands. Therefore, these commands are used when a specific modem script execution is needed.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Default : "ATS7=45 S0=0 L1 M1 V1 W2 X1 E0 Q0" 4.2.3.2.3. Encapsulation commands Command PPP 4.2.3.2.4. Description Setting PPP mode for encapsulation type PPP Parameter related Commands Commands authentication async Bcp chap Description PPP authentication type setting(CHAP/PAP).
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Default: 5 sec *role PPP operation mode setting (As Server/client) Default : not implemented yet. 4.2.3.2.4.1. PPP authentication related Commands Commands Description chap PPP CHAP authentication setting. pap PPP PAP authentication setting. 4.2.3.2.4.2. PPP async parameter Commands Commands map 4.2.3.2.4.3.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Defaule: enabled 4.2.3.2.4.5. PPP echo parameter Commands Commands interval timeout 4.2.3.2.4.6. Description PPP LCP echo request transmission interval setting. Default: 6 sec PPP LCP echo timeout count setting. Default: 3 PPP IPCP parameter Commands Commands Description IPCP option field to get default router information from Default-router Server . Default: enabled ms-dns AddPac Technology Co.,Ltd.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 4.2.4. PPP Configuration Information Point to Point Protocol (PPP) is one of standard transmission rules to send data through the WAN link. RFC1661 describes PPP specifications. Not only in the synchronous WAN (serial) line but also in the asynchronous WAN (dial-up line) PPP can be used. Since PPP is a standard rules, it guarantees compatibility with different manufacturers’ devices.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 [Procedure] Step Operation 1 Enter into the interface configuration mode. 2 Give PPP encapsulation protocol to the interface. 3 Move to the IP configuration mode. 4 Give an IP address to the interface. 5 Enable CHAP or PAP authentication. (Optional) 6 Set CHAP or PAP parameters. (Optional) 7 Set PPP default peer IP.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 ip address z Sets the IP address for the selected interface. In case the dynamic IP address is assigned via PPP protocol, IP address is assigned automatically via IPCP protocl user add {admin/high/normal/low} z 1. Sets the login name and the password to authenticate a router that is trying to access to another router that functions as a PPP PAP/CHAP server. 2.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 z ppp chap password password This command is for PPP client devices. This command registers a password to request connection to the PPP server device when using PPP CHAP authentication. z (An optional command for CHAP authentication). ppp pap sent-username username password password Sets PAP authentication in the PPP client device.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 z debug ppp { chap/error/negotiation/packet } 1. Decodes PPP low level packets.. 2. “Chap” option decodes challenge authentication related information. 3. “Error” option decodes PPP protocol level errors and error statistics. 4. “Negotiation” option decodes LCP and NCP protocol to set the PPP link. 5. “Packet” option decodes PPP low level packets.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 [Example] Normal PPP Configuration and Usage ! interface ether0.0 no ip address ! interface async0 ip address 210.222.41.245 255.255.255.0 ☞ Sets the IP address as “210.222.41.245/24 bit mask.” modem script dialer atdt9w01414 ☞ Sets the dialer modem command script used at call out. ppp authentication pap callin ☞ Sets the PPP authentication mode as PAP for the async 0 interface.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 [Example] Added Commands during PAP Configuration (Client) This is when AP160 dial-up VoIP gateway is used as a PPP CallIn on the client side. AP160(config)# interface async 0 ☞ Enters into the interface configuration mode. AP160(config-async0)# encapsulation ppp ☞ Sets the PPP mode. AP160(config-async0)# ppp authentication pap ☞ Sets the PPP authentication mode as PAP for the async 0 interface.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 async0 CCP: STOPPED async0 IPCP: I CONFREQ id=3 compress VJ0f00 async0 IPCP: O addr 168.126.0.233 CONFREJ id=3 compress VJ0f00 async0 IPCP: I CONFNAK id=3 addr 210.222.41.217 ms-dns 168.126.63.1 ms-dns 168.126.63.2 async0 IPCP: O CONFREQ id=4 addr 210.222.41.217 ms-dns 168.126.63.1 ms-dns 168.126.63.2 async0 IPCP: I CONFREQ id=4 addr 168.126.0.233 async0 IPCP: O CONFACK id=4 addr 168.126.0.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 [Example] Added Commands during CHAP Configuration (Client) This is when the AP160 dial-up VoIP gateway is used as a PPP CallIn client in the client side. AP160(config)# interface async 0 ☞ Enters into the interface configuration mode. AP160(config-async0)# encapsulation ppp ☞ Sets the PPP mode. AP160(config-async0)# ppp authentication chap ☞ Sets the PPP authentication mode as CHAP for the async 0 interface.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 AddPac Technology Co.,Ltd.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 Appendix A VoiceFinder AP160 VoIP Gateway Technical Description This Chapter explains the supported Technical Specification of VoiceFinder AP160 dial-up VoIP Residential Gateway. (* means that the item will be scheduled to implement) IP Routing Service IP Routing Protocols Static IEEE 802.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.
VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1 User Interface Others Industry Standard Command Line Interface (CLI) Network Time Protocol (NTP) Support Hardware Specification Microprocessor Network Interface Memory System LED Power Power Requirement Operating Temperature Storage Temperature Relative Humidity Cooling Method Depth x Width x Height Weight AddPac Technology Co.,Ltd.
