Installation guide

VoiceFinder AP200 VoIP Residential Gateway Installation Guide Version 1.0

AddPac Technology Co., Ltd. 46/

Chapter 2. Before Installation

Installation Requirements

The following recommendation should be followed for safe operation of the product.

z Ensure VoiceFinder AP200 Gateway is in a dust-free environment before and after

installation.

z Make sure to open VoiceFinder AP200 Gateway cover on a flat and safe surface.

z To prevent accidents, be careful with ties, scarf, sleeves, and any other loose

clothing from entangling with the chassis.

z Avoid any actions that may effect the equipment or the operator.

Electrical Requirements

There are two main sources of electrical problems with VoiceFinder AP200 Gateway: the

power supply and static electricity.

This section describes safety recommendations for each case.

z Electrical Safety

9 Operate at a position where immediate shut-off of power supply is possible.

9 Turn off the power while installing or taking the cover off the equipment.

9 Avoid operating the equipment alone at potentially dangerous environment.

9 Do not assume the power is switched off, but always confirm the power status.

9 Be extremely cautious when operating in a humid environment or with an

ungrounded power extension cable.

Warning

Danger