Installation guide

VoiceFinder AP200 VoIP Residential Gateway Installation Guide Version 1.0
AddPac Technology Co., Ltd. 46/
18
Table 1-1 shows the functional explanation about each LED of VoiceFinder AP200
Gateway.
Table 1-1: The interfaces and explanation of the front panel of AP200
No. Interface Explanation
(1)
POWER
Power LED, display whether external power is supplied normally or
not. (Green)
(2) FXS0 Display the operation status of “FXS0” voice interface port. (Orange)
(3) FXS1 Display the operation status of “FXS1” voice interface port. (Orange)
(4) PSTN Display the operation status of PSTN backup port (Red)
(5) LAN0 Display the operation status of LAN0 port.(Active Green)
(6) ACT0 Display the TX/RX status of LAN0 port. (Active Orange)
(7) LAN1 Display the operation status of LAN1 port.(Active Green)
(8) ACT1 Display the RX/TX status of LAN1 port. (Active Orange)
※ The LEDs on the front panel are vary by each VoiceFinder AP200 Gateway models.