User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
96 -
(NBMA) such as frame-relay, disable the split-horizon option.
z show route
Checks the routes in the routing table.
z show router
Checks the enabled routing process.
z show rip
Checks RIP status of each interface.
z debug rip
Decodes RIP packets exchanged by the router and shows status of RIP
packets.
[Example] RIP Configuration and Usage
router# config
router(config)# ip routing
☞ Enables IP routing.
Router(config)# router rip ☞ Enable the RIP process.
Router(config)# interface Ethernet 0.0 ☞ Enters into a configuration
mode for the sub-interface 0 of the Ethernet interface 0.
Router(config-ether0.0)# ip rip send 12 ☞ Set RIP v1/v2 through the
corresponding interface.
Router(config-ether0.0) # ip rip receive 1 ☞ Receives only RIP v1
packets among advertise packets, which come through corresponding
interface.
Router(config-ether0.0) # ip rip auth-type simple ☞ Set Simple
Authentication for RIP information exchange through corresponding
interface.
Router(config-ether0.0)# ip rip convergence split-horizon ☞ In
RIP Process, this enables Split-Horizon as Convergence Mechanism.
Router(config-ether0.0)# ip rip convergence poison-revers ☞ In