User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
83 -
z frame-relay parameter
Enters into the parameter setting mode of the frame-relay BECN and CIR.
z becn-enable
Enable the Becn function in the frame-relay parameter configuration
mode.
z bc { in / out } <bc-value>
Sets the committed burts size to input or output the corresponding port in
the frame-relay parameter configuration mode.
z be { in / out } <be-value>
Sets the excess burst size in the frame-relay parameter configuration mode
to input or output the corresponding port.
z cir { in / out } <cir-value>
Sets the committed information rate to input or output the corresponding
port in the frame-relay parameter configuration mode.
z mincir { in / out } <mincir-value>
Sets the minimum acceptable CIR to input or output the corresponding
port in the frame-relay parameter configuration mode.
z frame-relay lmi-type {ansi/q.933a} (To be implemented)
1. Sets the LMI type of the frame relay. (The default is ANSI.)
2. “q.933a” is an LMI for the frame-relay SVC service.
z frame-relay switching (To be implemented)
Sets the router as a frame-relay switch. (An optional command to set the
router as a frame-relay PVC switch.)
z frame-relay route <in-dlci> <out-interface> <out-dlci> (To be implemented)
Routes the frame that came to the <In-DLCI> of the switch to the
<Out-DLCI> of the <Out-Interface> when the router functions as a
frame-relay switch.