User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
68 -
z encapsulation { hdlc / ppp / frame-relay }
Sets the WAN encapsulation to use for the interface.
z ip
Selects the corresponding interface, and enters into the IP related
configuration mode.
z address <ip_address> <net_mask>
Sets the IP address for the selected interface.
z clock rate < speed_value >
If the interface is in the DCE mode, the router shall receive clocks by itself.
This command is used in this case. “Speed_value” represents the
transmission rate of the interface line. The unit of the “speed_value” shall
be Internal in the DCE mode, or External in the DTE mode.
z shutdown / no shutdown
An optional command to make the current interface up/down.
z show interface <if-name>
Shows the interface status of “if-name.”
z debug serial interface [0/1]
Shows KeepAlive message in the corresponding serial interface and packet
contents that are exchanged through line protocol.
z undebug serial interface [0/1]
Stops debugging in the corresponding serial interface.