User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
50 -
4.2.3.2. Commands of the Interface Configuration Mode 1
In the interface configuration mode, the user needs to define a certain
interface before starting configuration.
* For voice related interface commands, see Chapter 5.
Command Description
bridge Sets the bridge parameters.
encapsulation
Sets and changes the encapsulation method of the
interface. (AP2520 supports Ethernet, IEEE802.1q VLAN,
IEEE802.3 and PPPoE Encapsulation for Ethernet, HDLC, PPP,
Frame-Relay for Serial)
exit Returns to the previous (configuration) menu.
end Returns to the initial (Exec) mode.
Interface Selects an interface to set additional interface.
ip Sets IP protocol and IP service related items.
line-ctrl Change Line Parameter settings for the interface.
no
Cancels commands entered in the command line or
returns commands into default values.
mtu Sets the size of the IP Maximum Transmission Unit (MTU.)
ppp Sets PPP protocol related parameters.
rmon Sets VLAN parameters for the interface.
Shutdown Shuts down the selected interfaces.
vlan Sets VLAN parameters for the interface.