User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
49 -
debug-port Display debug message into remote telnet terminal.
dhcp-list
Enables the Gateway to function as a DHCP server or send
a DHCP packet broadcasting to other Gateways.
dial-peer Sets dial-peer with “VoIP” command.
exit Goes to the previous mode.
gateway
Makes voice gateway related configuration with “VoIP”
command.
hostname Changes the Gateway name of the network.
Interface
Enters into the interface configuration mode or creates a
logical interface.
ip Enables IP routing.
kill Disconnects a certain Telnet session in the Telnet process.
logging Changes or sets the message logging function.
nat-list Creates Network Address Translation (NAT.)
no
Cancels commands entered in the command line or
returns commands into default values.
Num-exp Sets a phone number extension in the VoIP.
queue-list Creates a queue-list to set the custom queue.
route Adds or deletes static routes.
router Enables a routing processor to use routing protocol.
service
Sets network-based service configuration – SNMP, Telnet,
FTP and TFTP.
snmp Sets “SNMP” command related items.
traceroute Execute traceroute
translation-rule Set translation rules in VoIP Service.
ttl Changes Time-To-Live (TTL) value.
user Registers or changes Gateway users.
utilization
An optional command to set time intervals to check
availabilities of the CPU, the Ethernet and the serial.
voice Sets VoIP Service or Avaible Codecs.
VoIP-port Sets the VoIP port.
VoIP-interface Sets the VoIP Interface.