User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
47 -
no
Cancels commands entered in the command line or returns
commands into default values.
ping
Sends an echo message to another network device and tests
if the echo message reaches the destination.
reboot Reboots the system.
rlogin
Establishes rlogin connection that is similar to the Telnet with by
original login.
save
VoIP Command. Make VoIP Configuration Script File uses
Gateway VoIP Running Configuration.
show
Shows configuration status and operating status of the
Gateway. However, in the user mode, “show” command
shows only limited information.
telnet
Logs in a neighboring network device through a virtual
terminal.
test
Tests sub-systems of the Gateway – the memory, interfaces
and so on.
traceroute
Traces the path that the packet passes through to reach a
certain destination.
who
Checks users who are currently online in the Gateway, login
method and login time.
write Saves the Gateway configuration file.
undebug Stops execution of “debug” command.
user
Adds a Gateway user or shows user information of the
Gateway. With this command, the current user cannot check
information of the user who has higher authority than
him/herself.