User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002

AddPac Technology Co., Ltd. -

304 -

5.7.5.16.3. Command Mode

Gateway Configuration Mode

5.7.5.16.4. Usage Guideline

To make enable function for H.323 VoIP gateway, uses register command. If

VoIP gateway is enable, this VoIP gateway try to look for gatekeeper using

H.323 RAS GRQ or RRQ message. If you use no register command, AP2520 VoIP

gateway is able to cancel registration from gatekeeper using H.323 RAS URG

message.

If you want to change or register new dial peer using script file with operating

gatekeeper, use no register (or no gateway) command in initial stage of script

file or loading configuration after doing un-registration from gatekeeper.

Otherwise, messages may be crashed between gateway and gatekeeper for

updating changing information

5.7.5.16.5. Examples

The following command example shows setting registration mode.

gateway

5.7.5.17. rule

To apply the translation rule to the calling/called party number of the

inbound/outbound call, use “rule” command in the translation-rule setup

mode. To remove the rule that has been set, add “no” command to the

above command.

rule tag input-matched-pattern substituted-pattern

no rule tag