User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
260 -
5.7.3.16.5. Examples
The following example configures the wink-signal duration on a voice port for
300 milliseconds:
voice-port 1/0
timing wink-duration 300
5.7.3.17. timing wink-wait (E&M Voice Port Command)
To specify the maximum wink-wait duration for a specified voice port, use the
timing wink-wait command in voice-port configuration mode. To reset the
default value, use the no form of this command.
timing wink-wait milliseconds
no timing wink-wait
5.7.3.17.1. Syntax Description
Keyword / Argument Description
milliseconds
Maximum wink-wait duration, in milliseconds, for a
wink start signal. Valid entries are from 100 to 5000
milliseconds. Supported on E&M ports only.
5.7.3.17.2. Default
200 milliseconds
5.7.3.17.3. Command Modes
Voice-port configuration
5.7.3.18. Usage Guideline
The call signal direction for the timing wink-wait command is out.
5.7.3.18.1. Examples
The following example configures the wink-wait duration on a voice port for 300
milliseconds: