User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
256 -
5.7.3.12.3. Command Modes
Voice-port configuration
5.7.3.12.4. Usage Guideline
The call direction for the timing delay-duration command is out.
5.7.3.12.5. Examples
The following example configures the delay signal duration on voice port for
3000milliseconds:
voice-port 1/0
timing delay-duration 3000
5.7.3.13. timing delay-start (E&M Voice Port Command)
To specify the minimum delay time from outgoing seizure to out-dial address for
a specified voice port, use the timing delay-start command in voice-port
configuration mode. To reset the default value, use the no form of this
command.
timing delay-start milliseconds
no timing delay-start
5.7.3.13.1. Syntax Description
Keyword / Argument Description
milliseconds
Minimum delay time, in milliseconds, from outgoing
seizure to outdial address. Valid entries are
numbers from 20 to 2000. Supported on E&M ports
only.
5.7.3.13.2. Default
300 milliseconds