User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
23 -
2.2. Installation Requirements
The following is the recommendation for safe operation of the equipment.
z Ensure the AP2520 VoIP is in a dust-free environment before and after
installation.
z Ensure the AP2520 cover is opened on a flat and safe surface.
z To prevent accidents, avoid ties, scarf, sleeves, and any other loose
clothing from entangling with the Chassis.
z Avoid any actions that may effect the equipment or the operator.
2.2.1. Electrical Requirements
There are two main sources of electrical problems with the AP2520 : the power
supply and static electricity.
This section describes safety recommendations for each case.
z Electrical Safety
9 In case of the occurrence of an electrical accident, operate at a
position where immediate shut-off of power supply is possible.
9 Switch the power off when installing or taking the cover off the
equipment.
9 Avoid operating the equipment alone at a potentially dangerous
environment.
9 Do not assume the power is switched off, but always confirm the
power status.
9 Be extremely cautious when operating in a humid environment or with
an uncovered power extension cable.
Warning
STOP
Danger