User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
196 -
rule 3 [1-9]…… 822%01%02%03%04%05%06%07%08
Created translation rules can be verified by “show translation-rule” command.
For example, “show translation-rule 100” command will show rules of the
translation rule set 100. To view the translation result, enter the number to test.
To check the translation result of “1234” in the translation rule set 100, enter
“show translation-rule 100 1234.” At this time, the result will be 1234.
5.3.7.2. Applying Translation Rules to the Inbound POTS Calls
To apply the translation rule set to all calls received in the voice port, make
following setting.
Step Command Description
1 Router# configure
Enters into the global configuration
mode.
2 Router(config)# voice-port location
Enters into the designated voice port
configuration mode.
The location is indicated by the
slot-number/port-number.
3 Router(voice-port)# translate-incoming
{called-number | calling-number}
tag
called-number: Applies the
translation rule to the inbound called
party number.
calling-number: Applies the
translation rule to the inbound calling
party number.
The tag refers to the rule set and tag
values range from 0 to 65535.
If the translation rule is applied to the called party and if numbers are entered
into the voice port in order, check if translation is made for each number
entered. At this time, translation shall be made only once.