User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
159 -
show : Show running system information
telnet : Open a telnet connection
Verify “root” command that is currently set. The following is when “root”
password is “Gateway.
3 BOOT# sh password
password = "Gateway"
To change current password in the booter, enter into the configuration mode
and change the password as using “passwd” command.
The following is when changing “root” command into “Gateway1”.
[Example] Password Change Configuration and Usage
1 BOOT# conf
1 BOOT(config)# ?
address : Set the IP address of an interface
clock : Manage the system clock
exit : Exit from the EXEC
history : Show command line history
passwd : Change password
2 BOOT(config)# passwd ?
<new password> New Password
3 BOOT(config)# passwd Gateway ?
<repeat new password> New Password for confirm
4 BOOT(config)# passwd Gateway Gateway ?
< cr >
5 BOOT(config)# passwd Gateway Gateway1
password changed
6 BOOT(config)#