User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
143 -
z ping [-flt] [-s source-ip-address] Target-host-IP [ datasize(max:1500) ]
[ npakcets ]
1. Sends echo messages.
2. Command options are as follows:
1) [-f: fast send mode]
2) [-l: loopback mode for HDLC]
3) [-t: sends one datagram per seconds]
4) [-s: specify the sending interface IP address]
z reboot
Reboots the Gateway system.
z rlogin [-l username] target-host
Opens the Rlogin connection.
z show {option}
1. Shows information that has been set in the Gateway or collected by
the Gateway. With this function, the user can check operation status
of the Gateway.
2. For more information and options, see “4.13 Fault Handling and
Debugging.”
z telnet { target-host-ip }
Opens a Telnet connection in the remote host.
z test { memory/interface } [ Ethernet/hdlc ] [ main-interface.sub-interface]
1. Tests the Gateway itself.
2. Command options are as follows:
1) memory: Tests the Gateway memory.
2) interface: Performs the loopback test for the designated interface.
z traceroute [-w waittime] [
-m max_ttl] [-s src_addr] host [packetlen]
Checks the path that can be accessed through a remote host.