User`s guide

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002

AddPac Technology Co., Ltd. -

138 -

[Procedure]

Step

Operation

1 Move to the configuration mode.

2 Set a SNMP community.

3 Set the host to receive SNMP trap.

4 Set SNMP related parameters.

5 Moves to the IP configuration mode.

Apply the queue-group that has been set to the corresponding serial

interface.

Use “show snmp” command to check if configuration has been

correctly made.

[Related Commands and Syntax]

z snmp community <snmp-manager-ip/0.0.0.0> <community-string> {ro/rw}

1. Register the Gateway in a certain SNMP community.

2. <snmp-manager-ip/0.0.0.0>: IP address of the SNMP Manager.

“0.0.0.0” is an option that enables all NMSs that have same

community-string values to function as the manager of the SNMP.

3. Community-String: String used for authentication during SNMP

communication

4. {ro/rw}: Sets whether to only read Gateway information or read and

write setting values of the Gateway.

z snmp host <trap-host-ip> <community-string> {v1/v2c}

1. Registers the host to which the Gateway sends trip and the SNMP

version when trap occurs.

2. <trap-host-ip>: IP address of the trap host (SNMP manager)

3. Community-String: String to be used for authentication during SNMP

communication

4. {v1/v2c}: SNMP version