AP-WP100 Wi-Fi Phone Quick User Guide AP-WP100 Wi-Fi Phone Quick User Guide AddPac Technology page 1 / 20 AddPac Technology Co., Ltd.
AP-WP100 Wi-Fi Phone Quick User Guide Caution: This wireless device may have radio interference and is not recommended to be used for the service related to the safety of life. page 2 / 20 AddPac Technology Co., Ltd.
AP-WP100 Wi-Fi Phone Quick User Guide Major Features Overall Speaker Phone A Variety of Key Features (ie. Push-to-Talk service) Voice Mail Interworking with the AddPac IP-PBX SIP-based VoIP Signaling Optimal Voice Quality by applying QoS to Cope with many different delays and Packet Errors in Internet Large Graphic LCD Size : 220 x 176 260K Color 2 inch TFT LCD Flash Memory 32MByte, mSDRAM 32MByte Audio Input/ Out Interface for Headset and external Speaker Wireless : IEEE802.
AP-WP100 Wi-Fi Phone Quick User Guide Hardware Specification Micro processor Memory WIreless High Performance RISC CPU Architecture Flash Memory 32Mbyte Main Memory 32Mbyte SDRAM IEEE 802.11 b/g Support Operating Frequency : 2412 MHz ~ 2472 MHz 802.11g : 54, 48, 36, 24,18, 12, 9, 6Mbps, Auto Rate 802.11b : 11, 5.
AP-WP100 Wi-Fi Phone Quick User Guide Miscellaneous WIFI Security QoS Interoperability Security Functions Operation & Management Other Scalability Features Enhanced QoS Management Features for Voice Traffics Cisco Style CLI Standard & Extended IPv4/IPv6 Access List Multi-level User Account Management IP accounting STUN Client WPA (WIFI Protected Access) Support 802.11i Security standard through implementation of AES/CCMP and WEP with TKIP security mechanism Support 802.
AP-WP100 Wi-Fi Phone Quick User Guide Using the Phone The Different Parts and Button Features of Your AP-WP100 Parts of the Phone 1. Ear Piece 2. LCD Displace 3. Soft Key F1 4. Soft KeyF2 5. Message 6. Cancel/Delete 7. SEND 8. END 9. Wi-Fi Search (UP) 10. Alarm (LEFT) 11. Phonebook (RIGHT) 12. Information (DOWN) 13. OK(confirm/execute) 14. Numeric Keypad 15. Microphone 16. Phone Charge Terminal 17. Ear Phone 18. Push To Talk (PTT) 19. Power Charge ( for the main body) 20. Volume 21.
AP-WP100 Wi-Fi Phone Quick User Guide Removing the Battery Push the battery cover downward while pressing the battery cover release button to open Lift up the lower part of the battery and slide down to remove Installing the Battery *To install the batter, reverse the procedure shown in the following pictures Turning-Off/On the Power If your press END and hold for more than 3 seconds the power is turned on and if you press and hold more than 3 seconds again the power is turned off.
AP-WP100 Wi-Fi Phone Quick User Guide When the power is turned off normally, the following picture is displayed on the LCD screen * If the phone is not used for more than 10 seconds, it is changed to the power saving mode as the LCD and button LED lamps are turned off. If you want to use again, press and hold END once. page 8 / 20 AddPac Technology Co., Ltd.
AP-WP100 Wi-Fi Phone Quick User Guide Making and Receiving a Call Making a Call by Entering a Phone Number Enter a number that you want to call and then press SEND. * As AP-WP100 is registered to the IP-PBX as an extension, you have to enter an external outgoing number first (Example for the external outgoing number: 9 or 8 + Phone number) Ending a Call To end a call, press END. Making a Call by a Number Stored in Recent Call List Press SEND at the Standby Screen state.
AP-WP100 Wi-Fi Phone Quick User Guide Menu Using the Button Press MENU to display 8 main menus. To enter each main menu 1. Use navigation key to select the menu and then press OK 2. Press the speed dial number (1~8) of each main menu on the numeric keypad. 1 PHONE BOOK 2 MESSAGE 3 ORGANIZER 4 DISPLAY 5 6 7 8 SOUND CALL SETTING SYSTEM SETTING PHONE INFO * Please refer to the next page for the menu table consists of sub-menus for each main menu. page 10 / 20 AddPac Technology Co., Ltd.
AP-WP100 Wi-Fi Phone Quick User Guide Menu Table The menu Table of AP-WP100 is organized as to follow: Main Menu Sub-Menu Description of Features Search the stored phone number by 1. PHONE BOOK 1. Search number/name/speed dial number 2. Add Contact Register a new number to the phone book 3. Groups You can add/delete/change a group stored in the phonebook 4. Speed Dial Add/delete/change a speed dial number. 1. New Message Write a message 2. MESSAGE 2. InBox Check the received message. 3.
AP-WP100 Wi-Fi Phone Quick User Guide 5. MAC Address Check the MAC address of the phone
AP-WP100 Wi-Fi Phone Quick User Guide Icon Description You can check the operational status from the following icons on the top of the LCD screen: 아이콘 설명 Disconnected to WiFi * The wireless connection is in the abnormal status. Retry connection by using WiFI Search. The normal connection of WiFi status and Signal Strength. *The signal strength is indicated in 6 different bar types.
AP-WP100 Wi-Fi Phone Quick User Guide Entering text To enter the phone number, write a message, set WiFi profile and enter text, refer to the following text entry method. * You can move to text entry mode by pressing the soft key F2 as it is shown in the picture above. 영문(대/소문자) Numbers 2 3 4 5 6 7 8 9 *Press the button once, twice or three times in button.
AP-WP100 Wi-Fi Phone Quick User Guide Installing To configure the settings of AP-WP100, set the wireless LAN connection and SIP server registration. Registering the Wireless LAN Connection 1. Search the wireless Access Point (AP) by pressing WiFi on AP-WP100 2. 3. 4. The connectable AP appears The icons of signal strength for authentication method is described below The registered profile is marked with yellow star 5.
AP-WP100 Wi-Fi Phone Quick User Guide 7. If you choose to use encryption, the following 4 methods (WEP 64BIT WEP 128BIT WPAPSK WPAPSK2) are available for selection. 8. After using encryption is set, specify the IP information to be used from the profile. 9. For setting the Static IP method, enter the IP address, net mask, primary router information. 10. page 16 / 20 AddPac Technology Co., Ltd.
AP-WP100 Wi-Fi Phone Quick User Guide SIP Server Registration 1. To register the user name and password, you need the information in the following picture. *For SIP server authentication information, ask the administrator of SIP server (IPNext Call Manager) page 17 / 20 AddPac Technology Co., Ltd.
AP-WP100 Wi-Fi Phone Quick User Guide Using the Supplementary Features 1. Call Pickup To pick up a call sent to the group (pick-up group), press Soft key F2. * Call Pickup requires the additional settings. Ask your administrator. 2. Call Forward To direct a call to another phone user with extension or external phone line, press Soft key F2 and the phone number After the forwarded phone user responses the call, press END. 3.
AP-WP100 Wi-Fi Phone Quick User Guide Troubleshooting Checking Network Connection Check the AP and network connection status, by pressing the info button on AP-WP100. * The specified IP information and connected AP information are displayed by pressing Info as it is displayed in the picture below Checking SIP Server Registration .If SIP server is not connected, the icon bar on the top displays page 19 / 20 AddPac Technology Co., Ltd. , then retry the registration.
AP-WP100 Wi-Fi Phone Quick User Guide AddPac Technology Co., Ltd. 2F & 3F, Jeong-Am Bldg., 769-12 Yeoksam-dong, Gangnam-gu, Seoul, 135-080, Korea Tel: +82 2 568 3848 Fax: +82 2 568 3847 Email: sales@addpac.com http:// www.addpac.com page 20 / 20 AddPac Technology Co., Ltd.
