Installation guide

AP-IP300 IP Phone Installation Guide Version 1.0
AddPac Technology Proprietary & Documentation
94
[Table 4-26] Description of SIP Options
SIP Options Description
Call Transfer Mode
Select the call-transfer mode. basic/attend.
Conference Service Tag
Enter a VoIP Tag for conference service
Conference Service Name
Enter a name for the conference service
Enable Ping
Enter firewall address to check the public IP address when
AP-IP300 is used under NAT/Firewall network environment.
Media Channel
Transfer RTP Session information to listen Inband
Ringbacktone of Public network under NAT/Firewall
environment.
Minimum Second
Set Session Timer
Retry Counter
SIP UA Retry Counter sets SIP INVITE re-transmission
count when AP-IP300 is dial-out. When there is fault on
network or network quality is not good, Trying message of
INVITE message will be delayed. In this case AP-IP300
transfer next INVITE message.
The default is set to 10.
Remote Party ID
When the user-name is not numeric but character, apply to
register message.
Route by Auxiliary
When the called party is not number but characters, this
option is used.
Set Local Domain
Transfer From/To field within SIP message to designated
domain not to IP address.
Signaling Port
The default is 5060 and this value is changeable.
Srv
Set the DNS SRV.
User Register
When the user-name is not numeric but character, this
option is used to register SIP server.