Installation guide

AP-IP300 IP Phone Installation Guide Version 1.0
AddPac Technology Proprietary & Documentation
84
(Figure 4-39) LAN Setup Menu Screen
[Table 4-20] Description of LAN Setup Menu Screen
Category Description
Factory
Set LAN to the factory default mode.
(default : 192.168.10.1)
Static
Configure LAN (the user sets the configuration)
None
Disable LAN Setup (Press OK button to select this option))
DHCP for 1 PC
In DHCP protocol mode for single PC, for sharing public same IP
address of AP-IP300’s WAN interface and LAN interface connected
to PC, AddPac proprietary public IP-Share mechanism is used
DHCP for Several PCs
DHCP for multiple PC are similar to general IP sharer which links
two (2) PCs or more.
Bridge Configures LAN settings with the bridge mode