Installation guide

AP-IP300 IP Phone Installation Guide Version 1.0
AddPac Technology Proprietary & Documentation
24
Prerequisites for Installation
The user should consider the EMI standards and distance limitations (EIA recommendation)
when installing the AP-IP300 IP Phone.
The following section describes the Ethernet cable and the RS-232C console cable AP-
IP300 supports.
Prerequisites for Installation
Unless a separate order is made, the tools and certain cables are not provided in the
package. Prepare the following equipments and tools before installation.
Cable for LAN and Console port connection
RJ-45 to RJ-45 cable for LAN port (included in equipment packing box)
Ethernet port
AP-IP300 IP Phone has one RJ-45 type RS-232C connector interface in rear side. It can be
used for AP-IP200 initial configuration, equipment monitoring and debugging. You must use
a cable and a connector. Refer to cable specification in Appendix on RS-232C console cable
pin specification
s.