Installation guide

AP-IP300 IP Phone Installation Guide Version 1.0
AddPac Technology Proprietary & Documentation
17
AP-IP300 IP Phone Software Specification
[Table 1-2] AP-IP300 Software Specification
Category Specification
LAN Protocol Static and IEEE 802.1Q VLAN Routing, RIP v1/v2, OSPF v2
WAN Protocol Point-to-Point Protocol (PPPoE for ADSL), etc.
Voice Codec
- G.711, G.723.1, G.726, G.729, etc.
H.323, SIP, and MGCP Triple Stack Support
ITU-T H.323 v3 VoIP Protocol with ITU-T H.235 Security Feature
Voice Processing Features Supports
- VAD, DTMF, CNG, G.168 and T.38 FAX Relay
ITU-T H.323 IP300, Gatekeeper Support
Audio Service
&
Signaling Protocol
Enhanced QoS Management Features for Voice Traffics
IP-PBX
Inter-working
SSCP AddPac Proprietary Protocol
IP-PBX
Signaling Protocol
SIP Signaling Protocol between AddPac IP-PBX and IP Phone
Voice Mail Voice Mail with IVR, Voice Mail Notification
Number & Call
Routing
Basic Call, Music on Hold, Blind Transfer, Call Pickup, Consult Call,
Switching Call, Consult Transfer, Call Waiting, Call Waiting Notify, Call
Park, Call Pickup Remote, Hunt Group, Call Swapping, individual Call
Park, Group Call Park, Call Forwarding , Unconditional, Busy, No Answer,
Voice Mail, Etc.
Messenger
Inter-working
MS Window based Smart Messenger Program
Conference AddPac IP-PBX Audio MCU or External MCU Support
Standard SNMP Agent (MIB v2) Support
Traffic Queuing and Frame-Relay Flow Control
Remote Management using Console, Rlogin, Telnet
Network Management
Web based Managements using HTTP Server Interface
Standard & Extended IP Access List
Access Control and Data Protections
Enable/Disable for Specific Protocols
Multi-Level User Account Management
Security Functions
Auto-disconnect for Telnet/Console Sessions